Publicité
EN
Do not put in the safety key or the battery pack until
you finalized the assembly of all the parts.
7.1
UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
• If parts of the machine are damaged, do not use
the machine.
• If parts are missing, do not operate the machine.
• If parts are damaged or missing, contact the
service center.
1.
Open the package.
2.
Read the documentation provided in the box.
3.
Discard cardboard corner from the box.
4.
Discard cardboard surrounded the mower from
the box.
5.
Remove the grass catcher from the carton.
6.
Cut open the rear corners of the carton, nearest
the back of the mower.
7.
Remove the mower from the carton.
For your personal safety, do not insert battery before
the tool is assembled completely.
WARNING
WARNING
WARNING
WARNING
English
7.2
UNFOLD AND INSTALL THE HANDLE
1
2
1.
Line up the handle knobs in one of the three
positions on the brackets.
2.
Push the bolt into the slot and rotate clockwise to
fasten it.
3.
Do the same operation on the other side.
Make sure that the two handle bolts are in the same
position.
7.3
INSTALL THE GRASS CATCHER
1.
Remove the mulch plug.
2.
Open the rear discharge door and hold it.
3.
Hold the grass catcher by its handle and engage
the hooks on the door rod.
4.
Close the rear discharge door.
10
NOTE
Publicité
