Invacare Aquatec KOGIA Manuel D'utilisation page 10

Aquatec® KOGIA
IMPORTANT!
– Ensure that the suction cups are mounted.
– Ensure that the battery is charged.
– Ensure that the spindle foot is fully inserted.
– When lifting bath lift components, remember
to correctly assess the weights. See section 9.1
Dimensions and weight, page 22.
– If a handrail is mounted at the inside of the bathtub,
use the side flap diverters (available as an accessory).
– Fold the side flaps outwards before raising the
backrest.
Place the seat B on the bottom of the empty bathtub. Ensure
1.
that the spindle foot retainer C is pointing towards the end
of the bathtub opposite the drain A.
10
2. Fold the side flaps of the seat outwards.
Place the backrest A (without the battery) onto the seat so
3.
that the hooks B of the backrest fit into the hinges C of the
seat plate D.
1584939-A