Publicité
Drawing 03A for NL-15 R / SQR, SAFETY FRAME UPGRADE February 2017
From 2-2017 a modification of the part has been executed to solve the fault indicator, on the
display (see page 18. 6.5.9)
06
Safety switch interrupted or defective
2 x SPAMA-SU2-C1 have been replaced by 1 x SPAMA-SU2-C4 (the safety switch mounting
plate)
In total 4 x SPAMA-SU2-B1 (Safety switch Omron V16-1-C5) are now used for the switches.
In the previous set, before February 2017, up this used to be 2 x SPAPEN-03-09 en 2 x SPAMA-
SU2-B1.
Modifications on machines from productions before 2-2017 must be executed by qualified
technicians; take note that this is an important safety feature of the NL-15 machine.
Modifications are estimated to take up to 30 minutes.
Version before Februari 2017
RETOUR AU CONTENU
Pour plus d'informations sur nos produits et savoir comment nous contacter, visitez thermopatch.com
Version since February 2017
27
27
Publicité
