Publicité
ERROR CODES
These error codes are for guidance only and all faults should be diagnosed and repaired by a qualified technician.
Display
Possible causes
F3 – F8
Temperature sensor failure
Temperature sensor of the IGBT
F9 – FE
failure
E1 / E2
Abnormal supply voltage
E3 / E4
Abnormal temperature
Bad induction hob heat
E5 / E6
radiation
Using the Oven
Before operating the oven, use a slightly damp cloth to carefully wipe the inner cavity wall. Clean the racks and tray and in
warm soapy water before using. Rinse thoroughly.
Slide the rack/tray between the guide bars of the shelf
support rails in the oven, and push it to the end.
In case the rack and tray are inserted together, lay the
rack over the tray.
SETTING THE CLOCK
To enable use of the oven you must first set the clock in 24 hour format. If the clock is not set, the oven will not operate.
1. After plugging in the appliance,
2. Press
and
The dot ● between the hour and minute digits will flash.
3. Repeatedly press
You can also press and hold
4. Press
and
The display will show the manual operation symbol
After about 3 seconds the dot will stop flashing, it indicates the time setting is confirmed.
COOKING
1. Turn the function selector to select the desired function.
Oven function
Oven lamp
Defrost
Dual grill with fan
Dual grill
Possible solution
Contact the store where you have purchased the
appliance.
Contact the store where you have purchased the
appliance.
Inspect whether power supply is normal and then
turn the hob on.
Inspect the cookware.
Restart after the induction hob cools down.
and the letter 'A' will flash on the display.
at the same time.
/
to set the correct time.
/
for fast setting.
at the same time to confirm.
To illuminate the oven interior
To thaw frozen food
This function is suitable for cooking large
quantities of food.
.
Application
EN-12
Publicité
