Publicité
COOKING SURFACE LAYOUT
2
1
5
The cooking zone, up to a limit, automatically adapts to the diameter of the pan.
To obtain the best efficiency of your hob, please place the pan in the centre of the cooking zone.
CONTROL KNOBS
Each knob controls a specific induction cooking zone. When you are not using the appliance, always ensure that all
controls are in the OFF position and the display will show the number 0.
OPERATING INSTRUCTIONS
1. Turn the control knob to the desired power level for the selected hotplate.
The display will show the number from 1-9 to indicate the corresponding power level.
You can turn the control to 9 for fast cooking. To cook more slowly or simmer, turn the
control to a lower setting according to the pan and the amount of liquid.
2. When you finish cooking, turn the control knob back to the OFF position.
The display will show the number 0.
The cooking zone(s) will remain hot for some time. DO NOT touch until they have
completely cooled down.
DETECTION OF SMALL NON-MAGNETIC ITEMS
When a unsuitable size or non-magnetic pan (e.g. aluminium), or some other small item (e.g. knife, fork, key) has been
left on the cooking zone, the symbol
about 1 minute.
AUTO SHUT DOWN
The feature occurs whenever you forget to switch off a cooking zone.
The default shutdown times are shown in the table below:
Power level
1~3
4~6
7~9
1. Induction cooking zone 1500 W
2. Induction cooking zone 2000 W
3. Induction cooking zone 1500 W
3
4. Induction cooking zone 2000 W
5. Power level display from 0-9
4
will flash and the cooking zone will automatically enter the standby state after
The cooking zones will shut down automatically after
8 hours
4 hours
2 hours
EN-11
Publicité
