Publicité
Recommended cleaning method
1. Spray the detergent sparingly on the
dry surface and let it work for a while
(do not let it dry).
2. Rinse off the loosened dirt with the
high-pressure jet.
After operation with detergent
1. Rinse the device with clear water for
approx. 30 seconds.
Interrupting operation
1. Release the trigger of the high-pres-
sure gun.
When the trigger is released, the de-
vice switches off. The high pressure
in the system is maintained.
2. Lock the trigger of the high-pressure
gun.
3. Set the high-pressure gun with the
spray lance in the parking position.
4. For work breaks longer than 5 min-
utes, switch off the device "0/OFF".
Finishing operation
CAUTION
Pressure in the system
Injuries due to uncontrolled water es-
caping under high-pressure.
Only disconnect the high-pressure
hose from the high-pressure gun or the
device if there is no pressure in the
system.
1. Release the trigger of the high-pres-
sure gun.
2. Close the water tap.
3. Press the trigger of the high-pres-
sure gun for 30 seconds.
The pressure still remaining in the
system is released.
4. Release the trigger of the high-pres-
sure gun.
5. Lock the trigger of the high-pressure
gun.
6. Disconnect the device from the wa-
ter supply.
7. Switch off the device "0/OFF".
8. Pull the GFCI plug out of the outlet.
CAUTION
Failure to observe the weight
Risk of injury and damage
Be aware of the weight of the device
during transportation.
Carrying the device
1. Lift the device by the carrying handle
and carry it.
Pulling the device
1. Pull out the transport handle until it
audibly engages.
2. Pull the device by the transport han-
dle.
Transporting the device
1. Drain the detergent tank.
2. Secure the device against shifting
and tipping.
English
Transport
in a vehicle
13
Publicité
