Publicité
High-pressure operation
ATTENTION
Damage to painted or sensitive sur-
faces
Surfaces are damaged if the spray dis-
tance is too close or if an unsuitable
spray lance is chosen.
Keep at least 30 cm spray distance
when cleaning painted surfaces.
Do not clean car tires, paint or delicate
surfaces such as wood with the dirt
grinder.
1. Insert a spray lance into the high-
pressure gun and lock it into posi-
tionby turning it 90°.
2. Switch on the device ("I/ON").
3. Unlock the trigger of the high-pres-
sure gun.
4. Press the trigger of the high-pres-
sure gun.
The device switches on.
5. Turn the Vario Power Control spray
lance until the required pressure
stage is indicated on the pressure
indicator.
Operation with detergent
DANGER
Failure to observe the safety data
sheet
Serious damage to health due to im-
proper use of the detergent.
Observe the safety data sheet of the
detergent manufacturer, in particular
12
the instructions for personal protective
equipment.
Note
Detergents may only be added at low
pressure.
Note
KÄRCHER detergents ensure fault-
free operation. Ask us for a consulta-
tion, request our catalog or our deter-
gent information sheets.
1. Fill the detergent tank with detergent
solution. Observe the dosage infor-
mations on the detergent container.
2. Close the detergent tank with the lid.
3. Insert the detergent tank in the de-
vice.
4. Use the Vario Power spray lance.
5. Turn the spray lance in the direction
of "MIX" until "MIX" is displayed on
the high-pressure gun.
During operation, the detergent
solution is mixed into the water
stream.
English
Publicité
