V 3.05
1/3 HP 2,000 GPH
Stainless Steel Sump Pump
SPECIFICATIONS
Motor
Performance
Construction
INTRODUCTION
The 1/3 HP 2,000 GPH Stainless Steel Sump Pump is a high efficiency, low noise pump capable of handling clean
water applications.
SAFETY
WARNING! Read and understand all instructions before using this device. The operator must follow basic
precautions to reduce the risk of personal injury and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection and maintenance instructions.
HAZARD DEFINITIONS
Please familiarize yourself with the hazard notices found in this manual. A notice is an alert that there is a
possibility of property damage, injury or death if certain instructions are not followed.
WARNING! This notice indicates a specific hazard or unsafe practice that could result in severe personal
injury or death if the proper precautions are not taken.
NOTICE! This notice indicates that a specific hazard or unsafe practice will result in equipment or property
damage, but not personal injury.
2
Horsepower
Voltage
Current Rating
Max. Flow Rate
Max. Suction Lift
Max. Discharge Head
Discharge
Solids
Fluid Temperature
Housing Material
Impeller Material
Float Switch
Cord Length
1/3 HP
120V
4.4A
2,200 GPH
24 ft
24 ft
1 and 1-1/4 in.
1/5 in.
35°C
Stainless Steel
Polyamide 66
Tethered
11 ft
For technical questions call 1-800-665-8685
8533606