Publicité
(40)
Haojue HJ110-6 99011H56111H000 V04 2021-3-11 09:22
3 (see the figure) marked on the wear limit mark
2, otherwise have the component in the rear brake
replaced by a qualified distribution and maintenance
organization for safety.
BWARNING
Riding with worn brake shoes will reduce braking
performance and will increase your chance of
having an accident.
before each use.
EN
qualified mechanic to replace brake shoes if the
shoes are worn to the limit.
TIRES
Periodic checks should be performed for tire pressure
and tire wear status. To ensure maximum safety and
life, check the tire frequently, in addition to the scheduled
inspections.
BWARNING
Tire pressure and wear status are very important
for the performance and safety of the motorcycle.
Be sure to check tire pressure and tire wear status
regularly.
Tire pressure
Under normal temperature, test the tire pressure by using
a tire pressure gauge, set the pressure base on the
(40)
Haojue HJ110-6 99011H56111H000 V04 2021-3-11 09:22
Inspect brake shoe wear
Ask your Haojue dealer or a
pressure value recommended by this manual.
pressure is too high or too low, it will affect ride stability,
and will cause the tire to wear.
Standard for tire pressure under normal temperature
Solo riding
kPa
Front wheel
175
Rear wheel
200
BWARNING
The tire pressures and surfaces are significant. If
they are neglected, the safety of the rider may be
endangered and the motorcycle may be damaged.
Please inspect the internal pressures and surfaces
of the tires of the motorcycle frequently.
Tire surface status
There are serial "T.W.I. ;" marks 1
(tire wear indicator) in the edge of
the tire. Check the bulge stock 2 of
T.W.I. in the tread near the mark. If
the tire wears off to reach the bulge
stock, the tire should be replaced.
Check the damage 3 (punctures or fractures) on the tire
surface visually. As surface damage may impede driving
stability, such tires should be replaced.
38
If the
Double riding
kgf/cm
2
kPa
kgf/cm
2
1.75
200
2.00
2.00
225
2.25
Publicité
