Télécharger Imprimer la page

Haojue HJ110-6 2021 Manuel D'utilisation page 37

Publicité

Cleaning and lubrication of drive
chain
Dirty drive chain will not only speed
up wear of the chain itself, but also
damage the sprocket.
Therefore,
following the cycle in the "regular
maintenance table", the chain must be cleaned and
lubricated with chain oil or engine oil after being cleaned
with detergent liquid.
Adjustment of drive chain sag
Adjust the drive chain to keep it in a normal state. If
the riding conditions are harsh, the times of adjustment
should be more frequent than that of regular maintenance.
BWARNING
An excessively loose chain will result in the chain
coming off the sprocket, resulting in an accident
or seriously damage to the engine. Please adjust
the drive chain in accordance with the methods
described below.
Haojue HJ110-6 99011H56111H000 V04 2021-3-11 09:22
1. Support the motorcycle with the
main stand.
2. Loosen the rear axle nut 4.
3. If the motorcycle equipped with
an all-cased type, dismantle the chain manhole cover
5 or the lower chain case 6. It is convenient to check
the looseness of the chain.
4. Loosen the lock nut 2 on the adjustor 1.
5. Move the adjuster 1 horizontally to make the chain
slack for 10–20 mm. Make the front and rear chain
wheels on a single straight line by making sure of the
left-right consistency of the sign positions 3 of the
rear wheel fork and the left and right adjusters 1.
6. After adjusting the tightness of the transmission chain,
tighten the rear axle nut 4 and the lock nut 2 and
then reconfirm the tightness of the transmission chain.
7. If the motorcycle equipped with an all-cased type,
mount the chain cover 5 or the lower chain case 6.
The drive chain of this motorcycle is made
of special materials carefully processed.
authentic parts (428 102 links) when replacing
the drive chain.
specifications may cause early damage to the
chain.
NOTE: Each time when replacing the drive chain, please
check the abrasion conditions of both the front and
35
Haojue HJ110-6 99011H56111H000 V04 2021-3-11 09:22
10–20 mm
BCAUTION
Using parts with different
(37)
EN
Use
(37)

Publicité

loading