Publicité
(See: Data for chimney calculations / Chapter 3.) A maximum of two other fires
can be connected to the chimney to be connected to the stove.
For safety reasons it is not permitted to use a steam extractor hood to remove air
when the stove is producing heat.
3. Technical specification
3.1 Dimensional drawings
CUBE S 6,0kW
The fireplace can usually be
connected to the chimney with an
angle pipe
With weak chimney draught, the
fireplace is to be connected to
the chimney through a vertical
flue gas pipe facilitating dis-
charge.
CUBE S StNS APNS WNS 6,0kW
28
Publicité
