Publicité
2
3
4
00̲CH456̲CN̲all.indb Eng-17
00̲CH456̲CN̲all.indb Eng-17
Plug the air hose
connector into the main
unit.
• Plug the air hose connector fi rmly
into the air hose socket on the
main unit, as illustrated.
Place the cuff at the height of the heart.
(
See page 20)
Press the START/STOP switch (the blue switch).
• All digits displayed is an initial display, indicating that the monitor is
functioning normal.
• The cuff is pressurized automatically.
* If the unit judges that pressurization is insuffi cient, it automatically
repressurizes.
* If the pressurization value exceeds 280mmHg, if pressurization feels
abnormal, or if you want to stop the measurement process, press the
START/STOP switch again. The cuff defl ates, and the power turns off.
MEASURING YOUR BLOOD PRESSURE
Air hose connector
*
is displayed when a pulse is detected.
* When you want to stop measurement, press the
"START/STOP" switch. The cuff is defl ated and
measurement stops.
- Eng 17 -
Air hose socket
2012/09/12 13:46:32
2012/09/12 13:46:32
Publicité
