Publicité
TIME ADJUSTMENT
Setting the clock enables measurements to be accurately recorded.
The monitor can record the date and time of measurement as well as the
measurement results. Be sure to set the clock after inserting the batteries. Set the
date fi rst and then the time.
* When you install the batteries for the fi rst time, the monitor will display the
1
Press and hold the
seconds.
The "year" indicator blinks.
2
Press the
Press
(The year can be adjusted in the range of 2011-2040.)
Press
The "year" is set and the "month" indicator blinks.
* You can fast-forward the numbers in display by
3
Press the
Press
Press
The "month" is set and the "day" indicator blinks.
4
Press the
Press
Press
The "day" is set and the "hour" indicator blinks.
00̲CH456̲CN̲all.indb Eng-13
00̲CH456̲CN̲all.indb Eng-13
clock setting screen. You do not need to perform step 1. Proceed to step 2.
If you set the clock and change its setting, start from step 1.
Date/Time Set switch for approximately two
Adjust switch to adjust the year.
Adjust switch to increase the number by one.
Date/Time Set switch to confi rm the setting.
pressing and holding
Adjust switch to adjust the "month".
Adjust switch to increase the number by one.
Date/Time Set switch to confi rm the setting.
Adjust switch to adjust the "day".
Adjust switch to increase the number by one.
Date/Time Set switch to confi rm the setting.
Adjust switch.
- Eng 13 -
2012/09/12 13:46:30
2012/09/12 13:46:30
Publicité
