Samsung DVD-VR330 Manuel D'instructions page 149

Using the Markers
1 Press the MARKER button during playback.
-- -- -- -- -- -- -- -- -- --
Marker
Press the ENTER button when the desired scene
2
appears.
01 - - - - - - - - -- N : 1
Marker
MOVE PLAY
• The number 01 is displayed and the scene is
memorized.
Press the œ √ button to move to the next position.
3
4 Press the ENTER button again when the desired
scene appears.
01 02 - - - - - - - -- N : 2
Marker
MOVE PLAY
• The number 02 is displayed and the scene is
memorized.
• DVD-RAM or DVD-RW (VR Mode) discs have
the Marker function instead of the Bookmark
function. The Marker function allows you to mark
up to 99 scenes. Since the scenes may be dis-
played as many different pages, numbering is
necessary. If a disc in use is encoded with Disc
Protect, Markers cannot be set or deleted. Only
playback is available.
50 - English
(VR mode)
N : 0
SELECT RETURN
CANCEL RETURN
CANCEL RETURN
Playing back a Marker
1 Press the MARKER button during playback.
Press the œ √ buttons to select a marked scene.
2
01 02 - - - - - - - -- N : 2
Marker
MOVE PLAY
Press the ENTER or √ll button to start playing
3
from the selected scene.
• If you press the NEXT SKIP (√√
œœ)button in marker mode,
l
PREVIOUS SKIP(
and the next or current marked point plays for
shorter than three seconds, playback starts from
the previous marked point.
Clearing a Marker
Press the MARKER button during playback.
1
Press the œ √ buttons to select a marked scene.
2
Press the CANCEL button to delete the selected
mark.
01 02 03 04 05 06
Marker
Marker 01 02 03 04 05 06
MOVE PLAY
• When a marker is cleared while DVD-RAM/
DVD-RW(VR mode) is playing, marker numbers
will change. For example, if the 7th marker is
cleared after ten markers are registered, the
marker numbers after the eighth will automatical-
ly move ahead by one and the 8th marker
becomes the 7th.
CANCEL RETURN
l
)button or the
07 08 09 10 √ √ N : 10
07 08 09 --
N : 9
CANCEL RETURN