Samsung DVD-VR330 Manuel D'instructions page 127

Setting the Remote Control
You can control part of another manufacturer's TV
functions with this remote control.
• Buttons that can be controlled on your TV :
TV POWER, INPUT SEL., VOL
TV MUTE, 0~9, 100 + .
28 - English
+
-
/ , CH/TRK ( / ),
To determine whether your television is
compatible, follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Press and hold the TV button and enter the two-figure
code simultaneously corresponding to the brand of
your television by pressing the appropriate number
buttons.
Brand Codes
SAMSUNG 01,14,15,23,31
DAEWOO 19
EMERSON 21
GRADIENTE 30
HITACHI 10
JVC 11
LG 06,08,18
LOEWE 28
MAGNAVOX 04
MITSUBISHI 13
Result: If your television is compatible with the remote
control, it will switch off.
It is now programmed to operate with the remote
control.
If several codes are indicated for your
television brand, try each one in turn until you
Note
find one that works. If you replace the remote
control's batteries, you must set the brand code
again.
You can then control the television using the
following buttons.
Button Function
TV POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
+
-
VOL / Used to adjust the volume of the television.
CH/TRK ( / ) Used to select the desired channel.
TV MUTE Used to toggle the sound on and off.
0~9 Used to input number directly.
100+ Used to select channels over 100.
The various functions may be able to be
controlled on all televisions. If you encounter
Note
problems, operate the television directly.
Brand Codes
NEWSAN 27
NOBLEX 25
PANASONIC 12,24
RCA 07,29
SANYO 05,20
SHARP 02,16,22
SONY 03
TELEFUNKEN 26
TOSHIBA 09
ZENITH 17