Samsung DVD-VR330 Manuel D'instructions page 142

Discs that cannot be played
• DVD-Video with a region number other than "1" or "ALL"
• 3.9 GB DVD-R Disc for Authoring.
• A DVD±R/DVD-RW(V) disc which has been recorded and
not finalized in a different manufacturer's recorder.
• PAL discs
• DVD-ROM/PD/MV-Disc/ DivX Video Disc, etc
• Video CD/CVD/SVCD/CD-ROM/CDV/CD-G/CD-I
This DVD Recorder & VCR can only operate with
discs that are compatible with DVD-RAM Standard
Note
Version 2.0.
Playback and/or recording may not work for some
types of discs or when specific operations, such as
angle change and aspect ratio adjustment, are
being performed. Information about the disc is
written in detail on the box. Please refer to this if
necessary.
Do not allow the disc to become dirty or scratched,
fingerprints, dirt, dust, scratches and deposits of
cigarette smoke on the recording surface may
make it impossible to use the disc for recording.
DVD-RAM/
±RW/±R discs may not be able to play
on some DVD players, depending on the player,
disc and the condition of the recording.
Discs with PAL programs recorded on them can-
not be played using this product.
Playing a Disc
1 Press the OPEN/CLOSE button.
2 Place a disc gently into the tray with the disc's
label facing up.
3 Press OPEN/CLOSE button to close the disc tray.
• Your DVD Recorder & VCR closes the disc
tray and plays the disc automatically.
• The recorder does not play discs automatically
after being powered on initially.
• When the recorder is powered on and a disc is
in the tray, the unit will be activated and wait in
stop status. Press the PLAY button to start play-
back.
4 Press the STOP button to stop playback.
When you stop playing the disc, the DVD
Recorder & VCR remembers where you stopped.
Note
When you press PLAY button again, it will pick up
where you left off. (unless the disc is removed or
the DVD Recorder & VCR is unplugged, or if you
press the STOP button twice.) This function is
only applicable to DVD-VIDEO, DVD-RAM,
DVD±RW, DVD±R or Audio CDs (CD-DA).
Do not move your DVD Recorder & VCR while
playing, as this may cause damage to the disc.
CAUTION
Make sure to press the OPEN/CLOSE button
to open or close the disc tray.
Do not push the disc tray while it is being
opened or closed, as this may cause a product
malfunction.
Do not place foreign materials on or in the disc
tray.
Some functions may perform differently or be
disabled depending on the disc type. If this
occurs, refer to the instructions written on the
disc case.
Be especially careful that children's fingers are
not caught between the disc tray and the tray
chassis when it closes.
After turning power on, it will take a few
seconds until the DVD Recorder & VCR
operates.
English - 43