Samsung DVD-VR330 Manuel D'instructions page 114

Step 1: Connecting the Antenna Cable
There are several ways to connect your DVD Recorder & VCR. Select the antenna connection that best suits you below.
Antenna + DVD Recorder & VCR + TV : No Cable box
You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this
method if you watch channels without cable box.
If you are using an off-air antenna that has 300-
ohm twin flat leads, use an external antenna
Note
connector (300-75 ohm adaptor : not supplied)
to connect the antenna to the DVD Recorder &
VCR.
If you have two separate antennas (one VHF
and the other UHF), use a UHF/VHF combiner-
Note
adaptor (available at most electronics shops) to
connect the antenna to the DVD Recorder &
VCR.
English - 15