Publicité
FIG. 6
Step 4 / Étape 4 / Paso 4 / Passo 4
Step 2 / Étape 2 / Paso 2 / Passo 2
Step 2 / Étape 2 / Paso 2 / Passo 2
FIG. 7
Step 1, 2 / Étape 1, 2 / Paso 1, 2 / Passo 1, 2
c
Step 3 / Étape 3 / Paso 3 / Passo 3
c
Step 8
Étape 8
Paso 8
Passo 8
e
Step 7 / Étape 7 / Paso 7 / Passo 7
FIG. 8
Step 7
Étape 7
Step 4
Paso 7
Étape 4
Passo 7
g
Paso 4
Passo 4
f
Steps 2, 3
Étapes 2, 3
Pasos 2, 3
Passos 2, 3
4
b
Step 3 / Étape 3 / Paso 3 / Passo 3
a
90˚
Step 3 / Étape 3 / Paso 3 / Passo 3
45˚
Step 1 / Étape 1 / Paso 1 / Passo 1
30' (9m)
d
Step 3 / Étape 3 / Paso 3 / Passo 3
Steps 4, 5 / Étapes 4, 5 / Pasos 4, 5 / Passos 4, 5
d
Step 6 / Étape 6 / Paso 6 / Passo 6
Step 6 / Étape 6 / Paso 6 / Passo 6
g
f
Step 5
Étape 5
Paso 5
Passo 5
5' (1.5m)
Step 1 / Étape 1 / Paso 1 / Passo 1
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY D
Safety Instructions for Lasers
WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/
or serious personal injury.
SAVE THESE INSTRUCTIONS
WARNING! Laser Radiation Exposure. Do not disassemble or modify the laser level. There are no user serviceable parts inside. Serious eye injury could
result.
WARNING! Hazardous Radiation. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation
exposure.
• Do not operate the laser in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
• Use the laser only with the specifically designated batteries. Use of any other batteries may create a risk of fire.
• Store idle laser out of reach of children and other untrained persons. Lasers are dangerous in the hands of untrained users.
• Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one laser, may create a risk of injury
when used on another laser.
• Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in injury. To locate
your nearest D
WALT service center call 1-800-4-DEWALT (1-800-433-9258) or go to http://www.dewalt.com on the Internet.
e
• Do not use optical tools such as a telescope or transit to view the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause anyone to intentionally or unintentionally stare into the laser beam. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser on increases the risk of staring into the laser beam.
• Do not disassemble the laser tool. There are no user serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may result in Hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow children to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. Removing labels increases the risk of exposure to radiation.
• Position the laser securely on a level surface. Damage to the laser or serious injury could result if the laser falls.
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemi cals known to the State of California to
cause cancer, birth defects, or other reproduc tive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber (CCA).
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles.
•
Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, and other construction activities. Wear protective clothing and
wash exposed areas with soap and water. Allowing dust to get into your mouth, eyes, or lay on the skin may promote absorption of harmful chemicals.
The label on your tool may include the following symbols.
V ...................................volts
mW ...............................milliwatts
....................laser warning symbol
nm ................................wavelength in nanometers
Laser 2 .........................Class 2 Laser
WARNING LABELS
For your convenience and safety, the following label is on your laser.
CAUTION: LASER RADIATION - DO NOT STARE INTO THE LASER BEAM. CLASS II LASER PRODUCT.
CAUTION: CLASS 2 LASER RADIATION WHEN OPEN DO NOT STARE INTO THE BEAM.
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D
WALT (1-800-433-9258)
e
e
ENGLISH
5
Publicité
