Publicité
EN
Gyro Response Direction Test (when using a Synapse)
This test ensures that the AS3X+ control system has the directions and any
auxillary control surface configurations set up properly.
1.
Assemble the aircraft, bind your transmitter to the receiver, and complete
the AS3X+ First Time Setup in the Forward Programming menu before
performing this test.
2.
From the Forward Programming menu select
Gyro Settings > System Setup > Utilities > Gyro Response Test.
This test will set all gyro response to maximum gain to make it easy to see
control direction repsonse. Do not fly in the Gyro Response Test mode.
3.
Move the aircraft as shown and ensure the control surfaces move in the
direction indicated in the graphic. If the control surfaces do not respond as
shown, do not fly the aircraft.
Aircraft Movement
The Gyro Response Test is only a direction test, it does not test if you have gain
applied in a given flight mode/configuration.
14
Control Surface Reaction
Publicité
