Publicité
Operating the appliance
Note: Use Turbo mode (normal mode) for
best results when cleaning hard floors and
deep cleaning rugs and carpets. Switch to
Auto mode or Eco mode when it is too diffi-
cult to push the nozzle on rugs or carpets.
→ Fig.
-
17
22
Using the flexible suction pipe
→ Fig.
-
23
25
Using the free-standing function
Note: Never use the free-standing function
of the floor nozzle with the appliance at-
tached.
→ Fig.
-
26
27
Vacuuming with the mini electro-
1
nozzle
→ Fig.
-
28
29
Using the foot release
→ Fig.
-
30
32
Compressing the dust
→ Fig.
-
33
34
Removing the appliance
→ Fig.
-
35
37
settings
Basic
Basic settings
settings
Basic
You can configure the basic settings for
your appliance to meet your needs and call
up additional functions.
Changing the setting
Note: If no display language is available in
your national language, select a display lan-
guage that is available, e.g. English.
Requirement: The appliance is switched
on.
Touch
.
1.
a Vacuuming stops.
a The display shows the menu with basic
settings and additional functions.
1
Depending on the appliance specifications
Press
and
2.
menu.
→ Fig.
38
Touch
to confirm the selection.
3.
→ Fig.
39
Change and confirm the setting or call
4.
up additional functions.
Touch
to return to the menu or to
5.
continue vacuuming.
servicing
and
Cleaning
Cleaning and servicing
To keep your appliance working efficiently
servicing
and
Cleaning
for a long time, it is important to clean and
maintain it carefully.
Cleaning the appliance
Clean the appliance with a soft, dry cloth
▶
only.
→ Fig.
40
Emptying the dust container
→ Fig.
-
41
44
Cleaning the filter unit
▶ Never allow the filters to come into con-
tact with liquids.
Note: It is recommended that you clean the
dust container filter when it is heavily soiled
and the suction power decreases.
Tip: Wipe off any dust particles on the fluff
filter with a slightly damp cloth.
→ Fig.
-
45
51
Cleaning the sensor
Note: The sensor surface must be clean for
the MicroClean display to work properly.
Clean the sensor if the LED ring for the Mi-
croClean display no longer works or does
not work correctly.
Wipe the sensor thoroughly with a soft,
▶
clean and lint-free cloth.
→ Fig.
52
Basic settings en
to navigate through the
25
Publicité
