Maintenance And Care; Warranty - HumanTechnik CM-BT Mode D'emploi

CM_BT_1008:BA_CM_BT.qxd 17.11.2008 07:52 Seite 28

Maintenance and care

The CM-BT headset does not require any maintenance. If the unit does beco-
me dirty, simply wipe it clean with a soft, damp cloth. Never use spirits, thin-
ners or other organic solvents. Do not set up the CM-BT headset where it will
be exposed to full sunlight for long periods. In addition, it must be protected
against excessive heat, moisture and severe mechanical shocks.
Note: This product is not protected against splash water. Do not place any
container s filled with water, such as flower vases, or anything with an open
flame, such as a lit candle, on or near the product.
Please make sure that the batteries are not exposed to excessive heat from
such as sunlight, fire or anything similar.

Warranty

The CM-BT headset is a very reliable product. Should a malfunction occur
despite the unit having been set up and operated correctly, please contact
your dealer or the manufacturer directly. This warranty covers the repair of the
product and returning it to you free of charge. It is essential that you send in
the product in its original packaging, so do not throw the packaging away.
The warranty does not apply to damage caused by incorrect handling or
attempts to repair the unit by people not authorised to do so (destruction of the
seal on the unit).
Repairs will only be carried out under warranty if the completed warranty card
is returned accompanied by a copy of the dealer's invoice/till receipt.
Always specify the product number in any event.
28 English