How To Register The Headset On A Compatible Pc - HumanTechnik CM-BT Mode D'emploi

CM_BT_1008:BA_CM_BT.qxd
How to register the CM-BT headset on a compatible PC
1 Switch on your PC and make sure that your Bluetooth hardware has been
activated.
2 Switch on the CM-BT headset.
5 Select the CM-BT headset from the list of devices found. To register the
headset and establish a connection between the CM-BT headset and the
PC, enter the following pass code: "0000".
We recommend that you use the Bluetooth software/hardware made by
Bluesoleil on your PC. www.bluesoleil.com
We regret that we are not able to provide telephone support for any pro-
blems you may encounter when operating this device with your PC.
26 English
17.11.2008
3 Activate the "register mode" for the CM-BT
headset by holding the function key pressed
down for 6 seconds (status indicator will flash
blue/red quickly)
4 Start your search for Bluetooth devices on the
PC. For more information, refer to the operating
instructions for your PC Bluetooth software.
07:52 Seite 26