Publicité
Test tone length
[GENERAL q Speaker Setting q Test Tone]
Speaker Setting
Size
Audio Digital Out
Distance (m)
Video Out
Level (dB)
Display Setting
Test Tone
Parental Lock
Move
Return
Select the Test Tone menu item, and choose between 2, 5
and 10 seconds. This represents the length of time that the
test tone is output from each speaker when Test Start is
selected.
2sec
5sec *
10sec
Select
Exit
Settings (General)
Digital output formats
[GENERAL q Audio Digital Out]
Speaker Setting
Audio Digital Out
Dolby Digital
Video Out
DTS
Display Setting
MPEG Audio
Parental Lock
Down Sample
Move
Return
This setting has an effect on the digital signal output from the
DIGITAL OUT terminals and the HDMI terminal.
When "i.LINK" is set to "60958", this setting also has an
effect on the digital signal output from the i.LINK (AUDIO)
terminal.
Select the format of different digital audio types for different
purposes, as detailed below:
Dolby Digital
Select either "Stream" for use with Dolby Digital compatible
amplifiers or "PCM" for use when connecting to a CD
recorder, MD deck, amplifier, etc.
DTS
Select either "Stream" for connection to a DTS-compatible
amplifier, or "PCM" for use with more general equipment.
Do not select the Stream option when connecting to non-
DTS-compatible equipment.
MPEG Audio
Select either "Stream" for connection to an MPEG-compatible
amplifier, or "PCM" for use with more general equipment.
Down Sample
Enable (ON) or disable (OFF) downsampling. That is, all digital
signals are converted, and output at 48kHz or 44.1kHz. Use
this if your amplifier does not have 96kHz/88.2kHz capability.
Notes on the DIGITAL OUT (coaxial or optical) terminals:
• Even when downsampling is turned off, some discs are
automatically downsampled to 48kHz or 44.1kHz.
• Even when downsampling is turned off, all discs with
sampling frequencies of 192kHz or 176.4kHz are always
downsampled to 96kHz or 88.2kHz respectively.
Note
< When you select "Stream", your amplifier will decode the
signal.
< When your amplifier is not compatible with Dolby Digital,
DTS or MPEG, select "PCM".
< If you want to output multi-channel PCM signals from the
HDMI terminal, set all three settings (Dolby Digital, DTS and
MPEG) to "PCM", and set Analog out to "Multi channel".
< If you select "Stream" with the HDMI amplifier not
compatible with Dolby Digital, DTS and MPEG, the
converted signal will be output from the HDMI terminal.
Stream *
Stream *
Stream *
ON *
Select
Exit
43
Publicité
