Télécharger Imprimer la page

Esoteric UX-3 Pi Manuel Du Propriétaire page 35

Publicité

Analog output settings
[AUDIO q Analog Out]
2ch
Outputs 2-channel audio from the AUDIO OUT, the i.LINK
(AUDIO)* and the HDMI** terminals.
If multi-channel program material is played, the multi-channel
material will be downmixed to two channels and the DOWN
MIX indicator will light on the display.
Multi Channel
The unit outputs the 5.1-channel surround sound from the
i.LINK (AUDIO)* and the HDMI** terminals.
Select this when the unit is connected to a surround amplifier
The MULTI indicator will light on the display.
*: Only when "i.LINK" is set to "PCM" (see page 33).
**: Only when "Audio Digital Out" settings are all set to
"PCM" (see page 43).
< Note that if "Multi Channel" is selected, only the front L/R
sound of the multi-channel material will be output from the
AUDIO OUT terminals.
< Note that the audio volume changes when the mode is
changed between 2-channel to multi-channel.
< Note that some DVD discs cannot be downmixed (from multi
channel to 2-channel).
< Speakers should be set up properly for multi-channel use. See
pages 41-43 for details.
< Note that if "Multi Channel" is selected and if the connected
HDMI component cannot accept multi-channel sound, only
the front L/R sound of the multi-channel material will be
output from the HDMI terminal.
< You can also use the 2CH/MULTI button of the remote
control unit to select either "2ch" or "Multi Channel".
When playback is stopped, press the 2CH/MULTI button.
Settings (Audio)
Digital output settings
[AUDIO q Digital Out]
ON
Audio is output from the DIGITAL OUT, the i.LINK (AUDIO)
and the HDMI terminals.
OFF
Audio is not output from the DIGITAL OUT, the i.LINK
(AUDIO) and the HDMI terminals. If you are not using these
terminals, we suggest that you use this OFF setting to reduce
influence on the analog sound.
CD Digital Direct
[AUDIO q CD Digital Direct]
Direct
This setting bypasses unnecessary circuitry and provides better
sound quality when listening to audio CDs.
Normal
When playing back DTS-CDs (DTS digital surround), select this
setting.
35

Publicité

loading