Installation
Side Decoration Assembly
(For Surface Mount Only)
"
FRONT SIDE EDGE OF FRAME ASSEMBlY
Peel the backing off the tape on the backside of
the SIDE DECORATIONS. Align the front inner
edge of the side decorations to the front side
edge of the FRAME ASSEMBLY.
Align the top surface of the side decorations to the
top surface of the FRAME ASSEMBLY. Secure the
side decorations by pressing them firmly against
the side of the FRAME ASSEMBLY. See figure ".
Viking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information
call 1-888-845-4641
E
Over Oven Installation
#
AlIGN TOP
SURFACE OF SIDE
DECORATION TO
TOP SURFACE OF
FRAME ASSEMBlY
FRONT INNER EDGE
OF SIDE DECORATION
Performance Checklist
1. Make sure the unit has been installed according
to all of the Installation Instructions and the
required Mounting Template.
2. Plug in the power cord.
3. Keep the Use & Care Manual and Installation
Manual.
8
2" (5.1 CM) FOR 30" W lOWER OvEN