Publicité
–
Mount and tighten original screw
Guideline
Exhaust control actuator screw
Info
If the actuator of the exhaust control has been removed, the end positions of the exhaust control must
be reprogrammed.
Final steps
–
Install cylinder head (see repair manual).
Guideline
After installation, the control unit must be recorded with the series mapping of the 300 cc version.
This must be performed in an authorized workshop.
es
.
M5
5 Nm (3.7 lbf ft)
ASSEMBLY 5
Loctite
®
243™
21
Publicité
