General Laser Tool Safety Warnings - Skil LL9325-00 Guide D'utilisation

GENERAL LASER TOOL SAFETY WARNINGS

READ ALL INSTRUCTIONS BEFORE USING THE
TOOL!
WARNING
on only when using this tool .
Do not remove or deface
any product labels. Avoid
direct eye exposure. The
laser beam can cause flash
blindness.
Do not operate the tool
around children or allow
children to operate the tool.
Do not place the tool in a
position that may cause
anyone to stare at the laser
beam, whether intentionally
or unintentionally.
Do not use on surfaces such
as sheet steel that have
shiny, reflective surfaces. The
shiny surface could reflect the beam back at the operator.
Always turn the laser tool off when not in use .
Leaving the tool on increases the risk of someone inadvertently
staring into the laser beam.
Do not attempt to modify the performance of this laser device in any
way. This may result in a dangerous exposure to laser radiation.
Do not attempt to repair or disassemble the tool. If unqualified
persons attempt to repair this product, serious injury may occur. Any
repair required on this laser product should be performed only by
qualified service personnel.
LASER RADIATION . Do not stare into beam .
Class II laser product . Turn the laser beam
AVOID EXPOSURE/EVITE LA EXPOSICIÓN
LASER RADIATION IS EMITTED FROM THIS APERTURE
LA RADIACIÓN LÁSER SE EMITE DE ESTA ABERTURA
CAUTION/PRECAUCIÓN
LASER RADIATION-DO NOT STARE INTO BEAM
RADIACIÓN LÁSER: NO MIRE DIRECTAMENTE EL RAYO
3