Skil LL9325-00 Guide D'utilisation page 16

Operating (Fig . 7)
Position the wall-mount base on the wall.
•
Mount the wall-mount base and the tool accordingly.
•
Press and hold the power/laser button for about 2 seconds to turn
•
on the tool. The LCD display indicates the absolute angle between
the laser line and true level. The laser is turned on automatically.
Rotate the tool according to the digital angle indication on the LCD
•
display so that the laser line is projected in the desired direction.
NOTE: Arrows
negative) is within 10 degrees of 0° and 90°. The height and
direction of the arrows on the LCD screen vary according to the
deviation of the angle relative to 0° or 90°. Follow the arrow icons to
fine tune the position of the tool to level or plumb.
Fig. 7
16
display only when the deviation (positive or