Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Problem
The laser line
projection is
weak.
The laser line is
hard to see.
Laser line is not
projected.
The tool can't be
turned on
20
Cause
1. Batteries are
weak.
1. The tool is too far
from the target.
1. The laser is turned
off.
1. No batteries
installed or
batteries are
depleted.
2. Batteries are
installed in wrong
polarity
Remedy
1. Replace with new
batteries.
1. Move the tool closer
to the target.
1. Press the power/
laser switch to verify.
1. Install new batteries.
2. Reinstall the
batteries.
Publicité
Chapitres
Table des Matières
