Publicité
EnGLIsh
Batteries
Cat #
V
DC
DCB546
18/54
DCB547/G
18/54
DCB548
18/54
DCB549
18/54
*Date code 201811475B or later
**Battery charge times matrix provided for guidance only; charge times will vary depending on temperature and condition of batteries.
DECLARATION OF CONFORMITY
THE SUPPLY OF MACHINERY (SAFETY)
REGULATIONS 2008
Cordless Small Angle Grinder
D
WALT declares that these products described under
e
"technical data" are in compliance with:
The Supply of Machinery (Safety) Regulations, 2008, S.I.
2008/1597 (as amended),
EN62841‑1:2015 +A11:2022 EN IEC62841‑2‑3:2021 +A11:2021.
These products conform to the following UK Regulations:
Electromagnetic Compatibility Regulations, 2016, S.I. 2016/1091
(as amended).
The Restriction of the Use of Certain Hazardous Substances
in Electrical and Electronic Equipment Regulations 2012, S.I.
2012/3032 (as amended).
For more information, please contact D
address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Karl Evans
Vice President Professional Power Tools EANZ GTS
D
WALT UK, 270 Bath Road, Slough
e
Berkshire, SL1 4DX
United Kingdom
20.03.2023
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.
44
Weight (kg) DCB104
Ah
6.0/2.0
1.08
60
9.0/3.0
1.46
75*
12.0/4.0
1.46
120
15.0/5.0
2.12
125
DCG418
WALT at the following
e
WALT.
e
Chargers/Charge Times (Minutes)**
DCB112/
DCB107
DCB113
DCB1102
270
170
140
420
270
220
540
350
300
730
450
380
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1) Work Area Safety
a ) Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
b ) Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c ) Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2) Electrical Safety
a ) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b ) Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
DCB115/
DCB116
DCB117
DCB1104
90
80
40
135*
110*
60
180
150
80
230
170
90
FOR FUTURE REFERENCE.
DCB118
DCB132
60
90
75*
135*
120
180
125
230
Publicité
