Publicité
Figure 30
1. Full
2. High
4.
Tip the machine onto its side (so that the air
filter is up) to drain the used oil from the oil-fill
tube
(Figure
31).
Figure 31
5.
After draining the used oil, return the machine to
the operating position.
6.
Carefully pour about 3/4 of the engine capacity
of oil into the oil-fill tube.
7.
Wait 3 minutes for the oil to settle in the engine.
8.
Wipe the dipstick clean with a clean cloth.
9.
Insert the dipstick into the oil-fill tube, then
remove the dipstick.
10.
Read the oil level on the dipstick
•
If the oil level on the dipstick is too low,
carefully pour a small amount of oil into the
oil-fill tube, wait 3 minutes, and repeat steps
g193261
3. Low
g017281
(Figure
30).
8
through
10
is correct.
•
If the oil level on the dipstick is too high,
drain the excess oil until the oil level on the
dipstick is correct.
11.
Install the dipstick into the oil-fill tube securely.
12.
Recycle the used oil properly.
24
until the oil level on the dipstick
Publicité
