Publicité
Precautions
On safety
Check that the operating voltage of your unit is
identical with the voltage of your local power
supply.
Should any liquid or solid object fall into the
cabinet, unplug the unit and have it checked by
qualified personnel before operating it further.
Unplug the unit from the wall outlet if it is not to
be used for several days.
To disconnect the cord, pull it out by the plug.
Never pull the cord itself.
The wall outlet should be near the unit and
easily accessible.
The unit is not disconnected to the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
Do not look into the lens while in use.
Do not place your hand or objects near the
ventilation holes. The air coming out is hot.
On preventing internal heat build-up
After you turn off the power with the / (Power)
button, do not disconnect the unit from the wall
outlet while the cooling fan is still running.
Caution
This unit is equipped with ventilation holes
(intake/exhaust). Do not block or place anything
near these holes, or internal heat build-up may
occur, causing picture degradation or damage to
the unit.
On repacking
Save the original shipping carton and packing
material; they will come in handy if you ever have
to ship your unit. For maximum protection, move
the lens position to the center and repack your
unit as it was originally packed at the factory.
On inspection of light source related parts
Since the unit uses a laser, when adjusting or
inspecting the light source related parts, particular
attention and a safe environment are necessary.
Be sure to consult with qualified Sony personnel
(charged).
6
EN
Note on leaving unused for long periods
If the unit is not used for a long period of time,
malfunction or a drop in performance can occur.
To avoid this, periodically turn on the power and
operate the unit.
On LCD Projector
The LCD projector is manufactured using high-
precision technology. You may, however, see tiny
black points and/or bright points (red, blue, or
green) that continuously appear on the LCD
projector. This is a normal result of the
manufacturing process and does not indicate a
malfunction.
Also, when you use multiple LCD projectors to
project onto a screen, even if they are of the same
model, the color reproduction among projectors
may vary, since color balance may be set
differently from one projector to the next.
On condensation
If the room temperature where the projector is
installed changes rapidly, or if the projector is
moved suddenly from a cold to a warm place,
condensation in the projector may occur. As the
condensation may cause malfunction, be careful
in adjusting temperature settings of the air
conditioner. If condensation occurs, leave the
projector turned on for about two hours before
use.
Notes on security
SONY WILL NOT BE LIABLE FOR DAMAGES OF
ANY KIND RESULTING FROM A FAILURE TO
IMPLEMENT PROPER SECURITY MEASURES ON
TRANSMISSION DEVICES, UNAVOIDABLE DATA
LEAKS RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY PROBLEMS OF
ANY KIND.
Depending on the operating environment,
unauthorized third parties on the network may
be able to access the unit. When connecting the
unit to the network, be sure to confirm that the
network is protected securely.
From a safety standpoint, when using the unit
connected with the network, it is strongly
recommended to access the Control window via
a Web browser and change the access limitation
settings from the factory preset values.
Also, it is recommended that you set a password
with a sufficiently long character string that is
hard to guess by others, and that you store it
safely.
Publicité
