Accessories - TOPRO TROJA WALKER Manuel D'utilisation

EN
Inspection // Maintenance // Re-use
It is recommended that general inspection and maintenance is carried out and that the items below are checked on
a regular basis, and at least once a year (how frequently is determined by how and how often the walker is used):
Tubes, frame and screws, forearm supports and handles, brakes, wheels, seat and accessories. This also applies when
the walker is to be prepared for re-use. Please refer to the detailed instructions presented in this user manual about
maintenance of the brakes and cleaning and disinfection of the walker.
If the walker does not work properly
Make sure the walker is unfolded correctly and that both brake handles are in the appropriate position.

Accessories

For pictures and TOPRO article numbers please see the inside of the cover of this user manual. Accessories mounted
on the walker may influence stability, we therefore advise you to use them carefully.
A Tray
B Anti slip mat for tray
C Crutch holder
D Back support
E Stabilizer bar
F Rear bag with zipper
G Bottle holder
The accessories are to be ordered separately to give the possibility to compose a TOPRO TROJA WALKER that suits
the individual users need. Contact your mobility shop, dealer or TOPRO for an updated overview of the accessories,
or visit our homepage www.topromobility.com.
In case of questions or product faults please contact your mobility shop or dealer.
10
TROJA WALKER
H Flower stickers, set of four
I Basket for oxygen bottle (only compressed, not liquid)
J Nameplate
K Lock
L One-handed brake
M Guiding handle for e.g. visually impaired
N Drag brake (pair)
www.topromobility.com
EN