Publicité
ASSEMBLY
This unit ships fully assembled from our factory without oil
in the engine. It must be properly serviced with fuel and oil
before operation.
If you have any questions regarding preparing your
generator for initial start, contact our service team at
service@wpowereq.com or call 1-855-944-3571.
UNPACKING
Weight hazard. Always have assistance when lifting the
generator.
1. Place shipping carton on a solid, flat surface and
carefully open the carton.
2. Remove and save the carton contents.
3. Remove and discard the packing tray.
4. Unfold the top of the plastic bag enclosing the generator.
5. Carefully cut the vertical corners of the carton to access
the generator.
6. Recycle or dispose of the packaging materials properly.
CARTON CONTENTS
• Generator
• User manual
• Quick Start Guide/Maintenance Schedule
• Remote start key fob
• 1.7 US Quart (1.6 Liter) bottle of SAE 10W-30 Oil
• Battery charger
• Spark plug socket wrench
• Oil Funnel
• Assembly wrench
• Wheel and lifting hook components
Item
• Lifting hook
• Flange bolt, M8
• Wheel
• Axle pin
• Washer
• Cotter pin
If any parts are missing, contact our service team at
service@wpowereq.com or call 1-855-944-3571.
12 | Westinghouse Outdoor Power Equipment
Quantity
1
4
2
2
4
4
INSTALL WHEELS AND LIFTING BRACKET
Assembling the generator will require lifting the unit on
one side. Install the wheels before adding fuel or oil.
Lifting hazard. Use two people when installing the
wheels. Refer to LIFTING HOOK in the OPERATION
section.
1. Place generator on a flat surface.
2. Align the lifting hook bracket with the mounting brackets
on the top of the fuel tank. Secure with four M8 flange
bolts.
3. Use the Lifting Hook to raise the unit enough to install
the wheels as shown.
The wheels are only intended for hand transport. The
wheels are not suitable for towing the generator either
on or off-road.
ASSEMBLY
NOTICE
NOTICE
Publicité
