Publicité
i-tec USB-A 3.0 / USB-C Dual Display Docking Station + Power Adapter 100 W
DRIVER INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10 (32/64 BIT)
ATTENTION! Do not connect the docking station to your laptop / tablet until you have
installed the appropriate drivers. Drivers must only be installed before first use. Before
installation, make sure that your system has installed the latest drivers for your device
and updated BIOS.
For Windows 7/8/8.1, download the drivers from our website www.i-tec.cz/en on the
"Download" tab of this product or on www.i-tec.cz/setup. Run the installation from the
downloaded file, select the installation language, and follow the instructions on the
screen.
In Windows 10, the docking station can be connected directly, drivers are automatically
installed from the system when connected to the Internet.
Note: In Windows 7 / 8 / 8.1 / 10, install the drivers as the "Administrator" user. The
screen may blink while the drivers are being installed, this is a standard process. Once
the installation is complete, we recommend restarting the notebook / tablet.
DRIVER INSTALLATION IN MACOS
ATTENTION! Do not connect the dock to your Mac until you install the appropriate
drivers. Drivers must only be installed before first use. We recommend that you have the
latest macOS operating system installed.
Download drivers from our website www.i-tec.cz/en/ on the "Download" tab of this
product and run the installation.
SAFETY INSTRUCTIONS
• Do not expose to extreme temperatures and air humidity
• Use the device on flat surfaces – you will prevent it from slipping and falling to the
ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user manual.
FREQUENTLY ASKED QUESTIONS
Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this product.
8 |
ENGLISH
Publicité
