Publicité
FM Antenna (Europe)
Outdoor FM Antenna
(75 ohms)
AG-V1020
a
J
Matching Transformer
(provided)
How to connect a coaxial cable to the matching
transformer
© Strip the cable as shown below.
Strip off outer covering.
Bend back outer shielding
mesh.
4mm
3mm
.
.
wat |
Strip core wire.
y
oe
@ Remove the cover by pulling the side-pieces
out with your finger nail.
@® Insert the core wire into the slit in the metal
tab as shown
in @). Crimp the metal claws
with pliers, etc. so they hold the shielding
mesh
portion. Replace the cover.
Metal claws
®
Insert into slit.
If you live reasonably close to a transmitter and want
to use the "T-type FM antenna provided, you will
have to connect it to the matching transformer
provided.
Connect the wires at the base of the T to
the matching transformer's terminals as shown.
Plug the transformer into the "FM 75" socket, extend
the top of the T and fix to a window frame or wall with
drawing pins, etc. where reception is best.
ype FM Antenna
| (3000)provided)
j
|
|
AG-V1020
il —,
- j™ 752
Matching transformer
(provided)
Publicité
