Publicité
for the 'Operation of Other TEAC
TAPE1 MONITOR
CD
PHONO
VIDEO! VIDEO 2
AM
eM
MEMORY MEMORY
Sap.
"SCAN
UTO/MANU DIRECT
z
8
2
TUNING
TUNING
Y TUNING a
oO
Memory own
Ne
TAPES
RECORD
2
>
Pi
=
i
YLUME a
UP.
TEAC
UR-402 REMOTE CONTROL UNIT HER
Remote Control Unit (UR-402)
Note:
Do not confuse "TAPE I" as described in this section
and
"TAPE 1" which means the tape deck connected
to the TAPE 1 terminals.
The same thing also applies to "TAPE II" and "TAPE 2".
=O
TAPE PAUSE button
CD SYNC button
In this configuration, the CD player's CD/DECK
SYNC terminal and the cassette deck's CD/DECK
SYNC terminal should be connected
using the
optional WR-7000 sync cable (note that this is
different from the optional remote control cable).
Synchronized operation of the CD player and
cassette deck can be started by pressing either the
CD SYNC button on the remote control unit or the
CD SYNC button on the cassette deck.
TAPE | buttons
Notes:
To start recording, simply press the RECORD
button; it does not have to be pressed together with
PLAY.
If the TAPE | mechanism of the double-transport
cassette deck does not have a recording function,
pressing the TAPE | RECORD button will have no
effect.
=
TAPE Il buttons
Note:
To start recording, simply press the RECORD
button; it does not have to be pressed together with
PLAY.
[5] CD buttons
SKIP ( |<<, >|) buttons: Each time these are
pressed, the pickup moves to the beginning of the
next tune in either the forward or reverse direction.
If held depressed, skipping continues until the
button is released.
PAUSE (11), PLAY/PAUSE (> /1I) buttons: To
temporarily stop CD play, press the PAUSE
button if
the CD player has an independent PAUSE
button;
Press the PLAY/PAUSE button if it has a
PLAY/PAUSE
button.
STOP (mM) button: Press to stop the CD player.
Publicité
