Publicité
Playing Video Sources
Recording with a Video Deck
Note:
Before performing this section operation, refer to
"VIDEO 2 INPUT Jacks" on page 6.
POWER
ON
m& : Video signals
CX
: Audio signals
VIDEO 1 IN
or
VIDEO 2 IN
Speakers
1. Press the VIDEO 1 or VIDEO 2 button.
2, Play the component corresponding to the button
pressed (VCR 1, VCR 2 or Video Disc Player).
Note:
Before performing this section operation, refer to
"VIDEO 2 INPUT Jacks" on page 6.
Video Tape Dubbing
POWER
ON
m& : Video signals
|
CX. : Audio signals
Playback
Recording
1. Press the VIDEO 2 button with TAPE
2 MONITOR
button set to OFF.
2. Operate the VCR 2/VDP for playback.
3. Operate VCR 1 for recording. In this way, the
video/audio signals from the VCR 2/VDP can be
dubbed onto VCR 1.
5
Publicité
