Publicité
Ex.: Channel 20
Press
twice, then [2___] .
i
Ex.: Channel 30
Press
three times.
Note: It is not necessary to press the "0" key to
input the unit's digit.
4. To release the memory
function while the
MEMORY
indicator appears in the display, press
the MEMORY
button again.
@ Recalling Frequencies
Press the numeric key(s) corresponding to the channel
number to tune directly to a broadcast.
@ Using the Memory Scan function
When the MEMORY SCAN button (®, on the remote
control) is pressed, the preset channels in which
frequencies in the band (AM or FM) selected have
been stored are scanned at 5-second intervals. When
you hear a broadcast you want to listen to, release the
Memory Scan function by pressing the MEMORY
SCAN button again.
Using the Memory Skip function
Every time the MEMORY
SKIP button (®, on the
remote control) is pressed, tuning skips to the next
higher channel broadcasting in the band selected.
Listening to Records and Compact Discs
POWER ON
1. Press the PHONO or CD function button.
2. Play the turntable (with a moving magnet
cartridge) or CD player.
Playing Tapes
Tape Deck 2
Note:
If two TEAC tape decks are used in the system, the
use of the UR-402 remote control unit may cause the
two decks to operate simultaneously.
1. Set the TAPE 2 MONITOR button to ON; the TAPE
MONITOR indicator will appear in the display.
2. Operate tape deck 2 for playback.
@ Playing tape deck 1
To play back using tape deck 1, set the TAPE 2
MONITOR
button to OFF then press TAPE 1 button.
Then operate the tape deck 1 for playback.
ee
Publicité
