Publicité
Direct Tuning
Preset Tuning
Using this method, the required frequency is input
directly, using the numeric keys.
1. Select the AM or FM.
2. Press the DIRECT TUNING button; *----" will blink in
the display.
3. Input the frequency of the broadcast you want to
hear with the numeric keys.
Models for U.S.A./Canada
FM:
100-kHz steps
AM:
10-kHz steps
Ex.:
FM 87.7 MHz
Ex.:
AM 780 kHz
Note:
When inputting the frequency, the last digit
need not be entered as it is always "0".
Models for Europe
FM:
50-kHz steps
AM:
9-kHz steps
Ex.:
FM 107.55 MHz
Ex.:
AM 1008 kHz
oe
The AG-V1020
has a preset memory.
If the
frequencies of broadcasts are stored in this memory
which has a capacity of 30 stations (channels), they
can be tuned to by a simplified procedure.
@ Presetting
POWERON
3
2,4
Fe ieee
—
i
|
| a
ES
|
OOo
1. Tune to a station by either Auto, Manual or Direct
tuning.
2. Press the MEMORY
button; the MEMORY
indicator
will light in the display for approximately 5 seconds.
3. While the MEMORY indicator is lit, press the
numeric key(s) to input the channel number in
which the data (AM or FM band and frequency) for
the broadcast is to be stored.
Note: If a frequency has already been stored in a
specified channel, the old data will be lost
and replaced by the new data.
Ex.: Channel 1
Ex.: Channel 10
Note:
If the frequenecy input is as follows, the
frequency will blink for several seconds, then
the previous frequency will appear in the
display again.
@ Does not correspond to the fixed tuning steps in
each band. (Europe models only)
© Out of the receivable frequency range.
sh ion
Publicité
