Publicité
Janome 4030QDC Instruction Manual
r
e
w
q
START
STOP
w
e
r
www.toews.com
Function Buttons and Keys
q
q Start/stop button
Press this button to start or stop the machine. The machine starts
running slowly for the first few stitches, it then runs at the speed
set by the speed control slider.
NOTE:
Start/stop button cannot be used when the foot control is
connected to the machine.
w
Reverse button
When stitch pattern 01, 02, 08 or 09
selected, the machine will sew in reverse while the reverse
button is pressed.
If you press the reverse button when sewing any other
stitches, the machine will immediately sew locking stitches
and automatically stop.
e
Auto-Lock button
When stitch pattern 01, 02, 08 or 09
selected, the machine will immediately sew locking stitches
and automatically stop when the auto-lock button is
pressed.
When sewing any other stitches, the machine will sew
locking stitches at the end of the pattern being sewn and
automatically stop.
r
Up/Down needle button
Press this button to bring the needle up or down.
The machine will stop with the needle up or down
depending on the needle position determined by this
button.
10
t
y u
4030QDC Owners Manual/ User Guide
Janome Sewing Machine 4030QDC
has been
has been
Publicité
