13. Troubleshooting
Fault
Possible cause
Check whether the plug is plugged in.
Check whether there is power to the
Motor does not run
socket.
Check whether the vacuum cleaner
on/off switch is switched on.
Is the brush blocked?
Reduced vacuuming
power
Is the dust bag full of dust?
Is the filter full of dust?
16 І 32
16 І 32
Remedy
Plug the mains plug back in to the socket.
Call an electrician.
Switch the on/off switch on.
Switch the vacuum cleaner off to remove the
blockages.
Remove and empty the dust bag.
Remove and empty the filter.