Publicité
3. Pull the new fleece filter bag with
rubber flange over the suction hose
port (inside).
Figure 2
4. Fit and lock the dirt receptacle.
Figure 3
Replacing the HEPA filter
HEPA filter (special accessory):
Change once a year
1. Unlock and remove the dirt recepta-
cle.
2. Turn the suction head by 180°.
3. Unlock and remove the HEPA filter
(special accessory).
4. Insert a new HEPA filter (special ac-
cessory) and click it into place.
5. Turn the suction head by 180°.
6. Fit and lock the dirt receptacle.
Replacing the motor protection
filter
1. Unlock and remove the dirt recepta-
cle.
2. Turn the suction head by 180°.
3. If necessary, unlock and remove the
HEPA filter (special accessory).
4. Remove the motor protection filter.
5. Fit the new motor protection filter.
6. If necessary, insert the HEPA filter
(special accessory) and click it into
place.
7. Turn the suction head by 180°.
8. Fit and lock the dirt receptacle.
Readjusting the closure strap
1. Unlock and remove the dirt recepta-
cle.
2. Readjust the closure strap so that
the dirt receptacle lies tightly against
the suction head.
Illustration F
3. Fit and lock the dirt receptacle.
Troubleshooting guide
DANGER
Danger of electric shock
Injuries due to touching live parts
Switch off the device.
Remove the battery pack.
Note
The device must be switched off imme-
diately if a malfunction occurs (e.g. fil-
ter breakage). The malfunction must
be eliminated before switching the de-
vice on again.
The device stops during operation
The motor thermo-protector has trig-
gered
1. Changing the fleece filter bag.
2. Replace the motor protection filter.
3. Check all parts for clogging.
4. Switch on the device.
Suction power decreases
1. Changing the fleece filter bag.
2. Correctly position/lock the dirt re-
ceptacle, readjust the closure strap
if necessary.
Escaping dust when vacuuming
1. Change the faulty fleece filter bag.
2. Check the fit of the fleece filter bag.
3. Correctly position/lock the dirt re-
ceptacle, readjust the closure strap
if necessary.
4. Insert the motor protection filter cor-
rectly.
No or insufficient suction perfor-
mance
1. Remove any blockages from the
suction nozzle, suction pipe or suc-
tion hose.
2. Replace the defective suction hose.
3. Changing the fleece filter bag.
4. Correctly position/lock the dirt re-
ceptacle, readjust the closure strap
if necessary.
5. Replace the motor protection filter.
English
11
Publicité
