Télécharger Imprimer la page

Anova PRECISION Oven 2.0 Manuel D'utilisation page 10

Publicité

ENGLISH
GET STARTED
The Oven is a countertop appliance. When finding a place
for your Oven, ensure it has a minimum of 2 inches (5cm) of
space on all sides and 4 inches (10cm) of space above the
oven and there is an outlet close by.
Remove all tape and packaging from your oven before first
use.
Attach the drip tray with the bowl side facing up under the
door. It should click into place.
There are two water tanks. The fresh water tank (upper),
and the waste water tank (lower). Both water tanks may be
removed by pushing the tank toward the back of the oven
until you trigger the click-in/click-out mechanism. The tanks
will pop out of the oven case and can slide out freely
Clean the upper tank before first use. Do not fill beyond the
MAX water line. Return the water tank to the Oven and click
into place.
The lower tank will catch any excess moisture that is not
exhausted. It is also used during the descale process.
It is recommended you use distilled water to minimize scale buildup and maintain the
correct operating function.
During initial setup you will be prompted to complete heating element preparation. Make sure the Oven is
situated in a well-ventilated area. Some vapor and odors are normal during the first cycle.
Clean the Oven and the accessories before first use.
10

Publicité

loading

Produits Connexes pour Anova PRECISION Oven 2.0

Ce manuel est également adapté pour:

An950-10