Publicité
KNOW YOUR PRESSURE WASHER
Read the Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
Oil Fill Cap/Dipstick
Detergent Siphoning
Tube/Filter
Air Filter — Protects engine by filtering dust and debris out
of intake air.
Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Detergent Siphoning Tube/Filter — Use to siphon pressure
washer safe detergents into the low pressure stream.
Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
High Pressure Outlet — Connection for high pressure hose.
Oil Fill Cap/Dipstick — Check and fill engine with oil here.
See page 17 for oil recommendations and filling instructions.
Primer Bulb — Prepares a cold engine for starting.
Pump — Develops high water pressure.
FEATURES AND CONTROLS
Recoil Starter
Automatic Cool Down System
Recoil Starter — Used for starting the engine manually.
Throttle Control Lever — Sets engine in starting mode for
recoil starter and stops running engine.
Water Inlet — Connection for garden hose.
Items Not Shown:
Adjustable Nozzle — Adjust for high or low pressure;
narrow or fan spray.
High Pressure Hose — Connect one end to the spray gun
and other end to the high pressure outlet.
Nozzle Extension — Attach to spray gun to use adjustable
nozzle.
Spray Gun — Controls the application of water onto cleaning
surface with trigger device. Includes trigger lock.
6
Air Filter
Throttle Control Lever
High Pressure Outlet
& Water Inlet
Primer Bulb
Fuel Tank
Pump equipped with
Publicité
