Télécharger Imprimer la page

Bushnell TRAIL SENTRY 119302 Manuel D'instructions page 11

Publicité

Setup Guide (cont.)
9. Pressing the Up/Down buttons during normal operation will switch the display between showing # of photos
stored (i) and # of events recorded (j). To view your captured photos, make sure the power is off, and remove the SD
card by pushing down lightly on the top edge of the card-it will pop up for removal. Insert it into an SD card reader
(available at most computer, photo, or electronics dealers) connected via USB to your PC or Mac to view, copy, or
delete the photos (standard JPG files) and movies (AVI files) inside the "DCIM/100MEDIA" folder on the card.
Double click on an individual file to see it, or open the files using the photo software of your choice. The event log is
the .TXT file, just double click to view with your default software that opens standard plain text files. If you do not
have a computer, or would like to more easily view your photos in the field, we recommend the Bushnell Trail Scout
Viewer. It is battery powered, and features 2 SD card slots, allowing you to easily copy photos to a larger capacity
card, or delete unwanted photos, as well as view your Sentry photos on its large color LCD display. The Trail Scout
Viewer also has a USB port, so it can function as a card reader for a computer
as well.
i
j
11
119302 Trail Sentry manual-Engli11 11
6/21/07 5:36:53 PM

Publicité

loading