Publicité
English – 12
an authorised Bosch eBike dealer. Please provide
the name of the manufacturer and the number of
the key.
Do not paint any components of the Bosch drive
u
system as they may cause premature failure of
the component.
Remove the eBike battery from the eBike before
u
beginning work (e.g. inspection, repair, assem-
bly, maintenance, work on the chain, etc.) on
the eBike. When working on permanently in-
stalled eBike batteries, take particular care to
ensure that the eBike cannot be switched on.
Unintentional activation of the eBike poses a risk of
injury.
Taking care of your eBike
Please observe the operating and storage tempera-
tures of the eBike components. Protect the drive unit,
on-board computer and eBike battery against ex-
treme temperatures (e.g. from intense sunlight with-
out adequate ventilation). Extreme temperatures can
cause the components (especially the eBike battery)
to become damaged.
Have your eBike checked by an expert at least once a
year (including mechanical parts, up-to-dateness of
system software).
Please have your eBike serviced and repaired by an
authorized bicycle dealer.
After-sales service and advice on using
products
If you have any questions about the eBike and its
components, contact an authorized bicycle retailer.
For contact details of authorized bike dealerships,
please visit www.bosch-ebike.com.
Please contact an authorized bicycle dealer if the
eBike battery is no longer working.
0 275 U07 3SS | (08.03.2023)
Cleaning
Do not submerge your eBike components in wa-
u
ter, or wash with pressurized hose. Your Bosch
drive unit is designed to be water tight to rain water
or non-pressure hose washing.
Keep all components of your eBike clean, especially
the battery pack contacts and corresponding holder
contacts. All components including the drive unit may
not be immersed in water or cleaned with a high-pres-
sure cleaner. Clean them carefully with a soft, damp
cloth (using only mild soap and water).
Bosch eBike Systems
Publicité
