Publicité
6.1 General
Before maintenance, it is necessary to perform the following:
● Cut off power supply
● Set the speed governor in the low speed position, "LOW".
6.2 Belt
The belt requires no adjustment. As a rule, the belt should be replaced once in every
9 months. To perform the replacement, it is necessary to contact a qualified specialist.
6.3 Feet
With the course of time, the cutter-mixer feet will get destroyed. If necessary, the
replacement should be performed.
6.4 Power cord
It is necessary to examine the power cord regularly. When any defects are detected,
it is necessary to contact a qualified specialist and perform the replacement.
6.5 Knife
Make sure that the knife blade width is at least 5 cm. If any knife wear is noted, it is
necessary to contact a qualified specialist and perform the replacement.
6.6 Nameplate
When the nameplate is damaged, it is necessary to contact a qualified specialist and perform
the replacement.
All manuals and user guides at all-guides.com
EN
15
Publicité
