Ksenia KSI1000016.300 Guide D'installation Rapide page 18

ENGLISH
2. From the Menu, scroll up to 'Programming' and then touch 'Enter'
3. Scroll the Menu up to 'Manage Codes' and then touch 'Enter'
4. Scroll the code list up you will find the Code to be changed and then touch 'Enter'
5. Scroll the Code attributions and then touch 'Enter' to modify it. For example, to activate a Code,
select 'enable ' and set it up as ON.
6. To modify a PIN, select 'Change PIN' and insert a new PIN.
7. To modify other Codes, repeat the sequence from step 4)
8. Once the Programming Cycle is completed, exit from the programming by touching 'ESC'
repetitively
Tags enrolling :
To enroll the proximity Tags (or Keys), please follow the following steps:
1. Insert the default Installer Code (123456) on the ergo Keypad
2. From the Menu, scroll up to 'Programming' and then touch 'Enter'
3. Scroll the Menu up to 'Manage Tags' and then touch 'Enter'
4. Scroll the Menu up to 'Save Tag' and then touch 'Enter' two times
5. Approach your Tag close the Keypad logo (Antenna area)
6. To acquire more Tags repeat the sequence from step 4.
7. Once the Enrolling Cycle is completed, exit from the programming by touching 'ESC' repetitively
Add or modify Phone Numbers in the Phone-Book:
To add or modify a number in your Phone Book please proceed as follows:
1. Insert the default User Code (147258) on the ergo Keypad
2. Enter the 'User Menu' by touching the symbol '#'
3. From the Menu, scroll up to 'Advanced Options' and then touch 'Enter'
4. From the Menu, scroll up to 'Phone Book' and the touch 'Enter'
5. Scroll the list of available numbers, touch 'Enter' to add or modify
6. Touch 'Enter' to add/modify a description or scroll to 'Number' to add/modify a number
7. Touch 'Enter' to modify a number
8. Insert the number using the Keypad and then touch 'Enter' when finished
9. Exit from the programming by touching 'ESC' repetitively
N.B.: For the Complete Programming Tree (either from the Keypad or from the basis software) please do
always refer to the Programming Manual available on our website or inside the basis software.
18
All manuals and user guides at all-guides.com