Ksenia KSI1000016.300 Guide D'installation Rapide page 14

ENGLISH
Codes:
Depending from the Control Panel Model, up to 128 User Codes can be activated. In this Template, 5
Codes have been already programmed as follows:
Nr. 1 MASTER CODE, default PIN: 147258
1.
Nr. 4 USER CODES , default PINs : 000003, 000004, 000005, 000006 ( which have to be activated
2.
either from the Master User Code or from the Installer Code).
Tags:
Depending from the Control Panel Model, up to 128 Tags can be activated. In this Template, 5 Tags have
been already programmed but need to be assigned from the Installer menu.
Voice Menu & Messages, SMS and WebServer (freely available with no license cost):
To take advantage of the Voice Menu and/or the SMS communication, the Control Panel needs to be
linked to the gemino BUS Bi-Directional GSM/GPRS Communicator. Moreover, to take advantage from all
fantastic remote WebServer capabilities, it is necessary to adopt one of the Ksenia Control Panel
Models with integrates the IP Connectivity, Ksenia codes : KSI1100016.300 - KSI1100048.300 -
KSI1100128.300.
Even in this case, there is a Template Programming free downloadable from our web site in the RESERVED
INSTALLER AREA : FILES DOWNLOAD => SOFTWARE => DEFAULT PROGRAMMING.
It is enough to download the programming file (default_en.zip), unzip and save it on a USB Key, connect
the USB Key with the related Adapter (Ksenia code KSI7501000.020) to the Control Panel. From the
Keypad, insert the Installer Code (123456), scroll the menu till 'Program from USB' and touch 'ENTER' .
The upload may last a few minutes, at the end of them the CP has loaded all voice messages, SMS and
WebServer.
The Control Panel is pre-programmed to send alarm events to the first 2 numbers of the Phone-Book as
well as the SMSs to the numbers listed as 3 and 4. It will be enough to insert the phone numbers to
activate this important feature of Alarm Signalling.
14
All manuals and user guides at all-guides.com